Mega System Tech iCV-03 Uživatelský manuál stáhnout pdf (Strana 51)

OCTE SAFEdoc

FAB

Wood Shaper

1. Wear Personal Protective Equipment (PPE) such as safety glasses, safety

goggles, face shields, gloves and proper clothing as appropriate.

2. No loose clothing, long hair or jewelry is allowed in the shop.

3. Do not operate the wood shaper without the instructor’s permission.

4. Be aware of the position of the on/off switches and emergency STOP button.

5. Do not use damaged cutters or cutterheads.

6. Keep cutters sharp. Do not try to force your work against a dull cutter.

7. Be sure power is off before installing cutters in the cutterhead. Be certain that the

cutters are inserted fully.

8. Keep guards and other safety devices in place and in good condition.

9. Do not try to cut too deep in a single pass. Several shallow cuts are safer.

10. Never try to cut "freehand" with your shaper system. Use a fence at all times.

11. Use a right-angle fixture to mill end grain, especially on narrow material.

12. Feed against the rotation of the cutterhead.

13. Use hold-downs wherever possible, and always use a push stick when milling

narrow stock.

14. Avoid working with small pieces.

AT ALL TIMES – IF IN DOUBT, SEE YOUR INSTRUCTOR

FAB SAFEdoc Page 48

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 119 120

Žádné komentáře

Mega System Tech iCV-03 Uživatelský manuál Strana 51